Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Thống kê

Đang online 11
Hôm nay 12
Hôm qua 21
Trong tuần 48
Trong tháng 131
Tổng cộng 3,190

P710 WISE - Đồng hồ đo áp suất màng WISE

Mô tả: P710 WISE - Đồng hồ đo áp suất màng WISE
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Bảo hành: 12 tháng
Xuất xứ: WISE
Ngày đăng: 30-12-2016

Chi tiết sản phẩm

Diaphragm seal type pressure gauge 
Model : P710-P720-P730Catalogue Download : 

Service intended
Diaphragm seal type gauges are suitable for the situation where the process medium would corrode the instrument connection and pressure sensing element. Furthermore, this type of gauge is highly recommended in a situation where the process medium contains suspended solids, or if it is sufficiently viscous to clog the instrument connection and pressure sensing element. Additionally, it is recommended to be used where the process medium might freeze or solidify the instrument connection and pressure sending element due to the ambient or process temperature change, and where the process medium requires the flushing from the system to prevent any contamination.
Internal diaphragm
Refer to gauge model
Suitable Pressure range (MPa, kPa, bar)
-0.1 ~ 0 to -0.1 ~2.5kPa 
0 ~ 0.1 to 0 ~ 35MPa
Filling liquid
Silicone oil
Working temperature
Ambient : -20 ~ 65°C 
Fluid : Max. 100°C
Diaphragm material
Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.
Temperature effect
Accuracy at temperature above and below the reference temperature (20℃) will be effected by approximately ±0.5% per 10℃ of full scale
Process connection
Model P710 : PT, NPT and others feasible 
Model P720, P730 : Flanges to ANSI, 
JIS or other standard
Upper flange (Gauge side)
Stainless steel (304SS, 316SS, Titanium)
316L SS, Monel, Hastelloy-C 
Titanium, Tantalum, Nickel, Alloy20
Under flange (Process side)
Stainless steel (304SS, 304L SS, 316SS, 316L SS)
Monel, Hastelloy-C, Titanium, Nickel
●Diaphragm and under flange are available in PTFE 
coating or PTFE lining (★See note) 
●Under flange (Process side) are available in purging 
plug or heating/cooling jacket